Engineering Grade Retroreflective Permanent Destructible Label
#105677 - 105688 - Finish Type, Adhesive Type Product Type
This is a 6 mil engineering grade Retro-Reflective label. It provides good reflection even in poor visibility and bad weather conditions and complies with international standards for retroreflectivity ASTM D 4956 for Type I, Class 1. As part of our new Digital line this product has been primed for printing with Rippedsheets.com proprietary top coats. These retroreflective labels are also tamperproof and will break into pieces if removal is attempted. It is a flexible, weather resistant material that has an excellent impact and scratch-resistant surface. This material has excellent resistance to most oils, greases, fuels, weak acids, salts, and alkali. It can be used for traffic control (e.g. stop signs), black and white regulatory signs, reflective letterings and numbers, and other outdoor signage.
Short Run
| Sheet Ct. | Price Per Sheet |
|---|---|
| 8.5″ × 11″ | |
| 10 | $11.30 |
| 25 | $8.98 |
| 50 | $7.72 |
| 100 | $6.95 |
| 250 | $6.11 |
| 500 | $5.41 |
Let us print for you! Full Color Printing available.
Specifications
| Physical Properties | Value |
|---|---|
| Thickness (without liner/adhesive): | 6 mil |
| Temperature Resistance: | -69°F to 180°F |
| Adhesive: | Solvent-based Permanent |
| Adhesion Power: | 3.4 lb/in |
| Tensile Strength: | 10 MPa |
| Minimum Application Temperature: | 50°F |
| Meets ASTM D 4956 specifications for retroreflective sheeting. Type I, Class 1. | ||||||
|---|---|---|---|---|---|---|
| Min. coefficient of retroreflection (foot candle/ft²) | Daytime Luminance Factor (Y%) | |||||
| OBSERVATION ANGLE | 0.2° | 0.5° | ||||
| ENTRANCE ANGLE | -4° | 30° | -4° | 30° | Minimum | Maximum |
| White | 70 | 30 | 30 | 15 | 27 | - |
| Yellow | 50 | 22 | 25 | 13 | 15 | 45 |
| Orange | 25 | 7 | 13 | 4 | 10 | 30 |
| Red | 14 | 6 | 7.5 | 3 | 2.5 | 15 |
| Green | 9 | 3.5 | 4.5 | 2.2 | 3 | 12 |
| Blue | 4 | 1.7 | 2 | 0.8 | 1 | 10 |
| Brown | 1 | 0.3 | 0.3 | 0.2 | 1 | 9 |
Retroreflectivity describes how light is reflected off a surface and returned towards the original source. The entrance angle is theangle in which the light source enters the reflective sheeting. The observation angle is the angle between the path of the light source and the observer's sight path. The coefficient of retroreflection measures the efficiency of a retroreflective material. The retroreflective efficiency is the percent of light returned back to the source. Typical retroreflective beaded sheetings have a 7% to 14% retroreflective efficiency.
Complies with international standards for retroreflectivity ASTM D 4956 for Type I, Class 1
The states in blue have approved the use of this reflective material for traffic control.
Colors Available
This material comes in these 12 colors.
| Color Name | Part Number |
|---|---|
| White | 105677 |
| Lemon Yellow | 105678 |
| Yellow | 105679 |
| Orange | 105680 |
| Red | 105681 |
| Ruby Red | 105682 |
| Sky Blue | 105683 |
| Blue | 105684 |
| Black | 105685 |
| Brown | 105686 |
| Gold | 105687 |
| Green | 105688 |
For other colors please call for availability and minimums
Availability
This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.