Economy Gloss Permanent Adhesive Paper Labels
#101200-20 - Gloss Permanent Paper Labels
We offer this coated 58.8# face stock with a high grade clear permanent self adhesive and a 50# liner. Print quality is excellent. Works well on desktop color laser copiers and printers. (See 101200 for floor model laser printers).
The adhesive on this material is a clear acrylic adaptable to many surfaces with a minimum application temperature of 25°F and a service range of -65°F to 200°F.
Short Run
| Sheet Ct. | Price Per Sheet |
|---|---|
| 8.5″ × 11″ | |
| 10 | $6.49 |
| 25 | $3.76 |
| 50 | $2.87 |
| 100 | $2.40 |
| 250 | $1.74 |
| 500 | $1.62 |
Long Run
| Sheet Ct. | Price Per Sheet |
|---|---|
| 8.5″ × 11″ | |
| 500 | $0.63 |
| 1000 | $0.56 |
| 2000 | $0.43 |
| 5000 | $0.40 |
| 10000 | $0.34 |
Let us print for you! Full Color Printing available.
Specifications
Description:
This label features a standard pressure sensitive construction including a premium high gloss face stock used in a wide variety of applications, that is cast coated one side and has excellent printability and die-cutting traits. It has an aggressive permanent acrylic adhesive with high initial tack, high shear and ultimate adhesion, and a standard 50# fully bleached kraft liner that offers high internal strength for die-cutting, perforating and refolding.
Facestock
- Premium cast coated one side stock with excellent toner receptivity and print characteristics that offers 90% brightness.
- Weight: 54# paper
- Caliper: 3.1 mils
Adhesive:
- Clear tri-bonded acrylic permanent
- Coat weight: 1.5 cwt
- Min. application temp: +32°F
- Indirect Food: No
- Min. service temp: -4°F
- Direct Food: No
- Max. service temp: 248°F
Note: For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.
Liner:
- Fully bleached kraft (lay-flat) liner that has been silicone coated one side to give a controlled release.
- Caliper: 3.2 mils
- Weight:53#
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.
Availability
This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.