Outdoor/Indoor Matte Gray Polyester Permanent Adhesive Label
#102260 - Matte Permanent Polyester Label
This 2.0 mil gray polyester facestock is Matte top coated gray and resists degradation from scuffing, chemicals, and wide temperature fluctuations. The self adhesive bonds to high and low energy plastic surfaces and slightly oily metals. The adhesive is a clear acrylic, has excellent resistance to chemicals even at high temperatures, and is adaptable to many surfaces with a minimum application temperature of 50°F and a service range -40°F to 302°F. Prints well with color or black and white laser printers.
Short Run
| Sheet Ct. | Price Per Sheet | |||||
|---|---|---|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | ||||
| 10 | $9.40 | $11.55 | $14.23 | |||
| 25 | $6.55 | $7.99 | $9.91 | |||
| 50 | $5.50 | $6.82 | $8.40 | |||
| 100 | $4.05 | $5.01 | $6.20 | |||
| 250 | $3.19 | $3.98 | $4.26 | |||
| 500 | $3.05 | $3.52 | $4.19 | |||
Long Run
| Sheet Ct. | Price Per Sheet |
|---|---|
| 8.5″ × 11″ | |
| 500 | $2.50 |
| 1000 | $1.95 |
| 2000 | $1.81 |
| 5000 | $1.64 |
| 10000 | $1.59 |
Let us print for you! Full Color Printing available.
Specifications
| Physical Properties | Value |
|---|---|
| Thickness (without liner/adhesive): | 2.7 mil |
| Temperature Resistance: | -40°F to 302°F |
| Adhesive: | Permanent Acrylic |
| Shear: | 75 |
| Tack: | 550 |
| Minimum Application Temperature: | 50°F |
Product Information
Description:
This is a matte top-coated computer printable gray polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with a backside-printable two-sided poly coated tissue backed easy-release liner. This product is UL approved printing materials - Component when used with certain printer/toner combinations. It is recognized for indoor/outdoor use with occasional exposure to lubricating oil and water.
Facestock:
- Polyester top-coated for excellent anchorage
- Caliper: 2.7 mils
- Dimensional Stability: 100%
Adhesive:
- Clear acrylic permanent
- Caliper: 0.8-0.9 mils
- Min. Application Temperature: 50°F
- Indirect Food Contact: No
- Min. Service Temperature: -40°F
- Direct Food Contact: No
- Max Service Temperature: 302°F
- UL Approved: Yes
Note: For best bonding conditions, application surface should be at room temper-ature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive's effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.
Liner:
- Clay coated Kraft (lay-flat) liner which has been silicone coated one side to give a controlled release
- Caliper:5.6 mils
- Weight:78#
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user's intended use for their particular purpose under their own operating conditions.
Technical Specifications for Underwriters Laboratory Users
Rippedsheets.com is Recognized under the Component Recognition Program of Underwriters Laboratory under file E234761, Under the Category of TEOU2, (Repackaged Program).
PN 102260 prints well in any color or B/W laser printer with a label setting. Here are the specific printers approved for UL certification:
| HP Laser Jet 4L/ML, 4P/M | 92274A |
| HP Laser Jet IIP/IIP Plus and IIIP | 92275A |
| HP LJ IIISI/IIISI MX and 4SI/4SI MX | 92291A 92291X |
| HP LJ II/IID and III/IIID | 92295A |
| HP LJ 4/5 Series | 92298A 92298S 92298X |
| HP LJ 4V and 4MV | C3900A |
| HP 4, 4M, 4+, 4M+, 5, 5M, 5N | C3973A |
| HP LJ 5P/MP and 6P/MP | C3903A C3903F |
| HP Laser Jet 5SI and 8000 | C3909A C3909X |
| HP LaserJet 1100 and 1100A | C4092A |
| HP Laser Jet 3100, 3100xi , 3100se | C3906A |
| HP LaserJet 2100 Series | C4096A |
| HP LaserJet 4000, 4050 | C4127A |
| HP LaserJet 4000, 4050, and 4100 | C8061A C8061X |
| HP LaserJet 8150 Series | C4182X |
| When Label is affixed to: | Minimum Temperature | Maximum Temperature |
|---|---|---|
| aluminum | -40°C (-40°F) | 150°C (302°F) |
| galvanized steel | -40°C (-40°F) | 150°C (302°F) |
| alkyd base enamel | -40°C (-40°F) | 150°C (302°F) |
| stainless steel | -29°C (-20°F) | 150°C (302°F) |
| polyester paint | -29°C (-20°F) | 125°C (257°F) |
| porcelain | -40°C (-40°F) | 100°C (212°F) |
| nylon | - | 100°C (212°F) |
| melamine plastic | -29°C (-20°F) | 100°C (212°F) |
| polycarbonate | -29°C (-20°F) | 100°C (212°F) |
| phenolic | -29°C (-20°F) | 100°C (212°F) |
| polystyrene | -29°C (-20°F) | 80°C (176°F) |
| acrylic paint | - | - |
| acrylonitrile butadiene styrene (ABS) plastic | -40°C (-40°F) | 80°C (176°F) |
| unsaturated (Thermoset) polyester plastic | -40°C (-40°F) | 80°C (176°F) |
| polypropylene plastic | - | 80°C (176°F) |
Suitable where exposed indoors to high humidity or occasional exposure to water or lubricating oils. Also suitable where exposed outdoors affixed to aluminum, porcelain, galvanized steel, alkyd enamel, acrylic paint, stainless steel, polyester paint, nylon, melamine plastic, polycarbonate, phenolic, polystyrene, ABS plastic and unsaturated (Thermoset) polyester plastic.
3 Year Outdoor Test Results
Certifications
- Coalition of Northeastern Governors (CONEG) Compliant
- Consumer Product Safety Improvement Act (CPSIA) Compliant
- Registration Evaluation Authorization & Restriction of Chemicals (REACH) Compliant
- Restriction of Hazardous Substances (RoHS) Compliant
- Waste Electrical & Electronic Equipment (WEEE) Compliant
Availability
This product is stocked and can be shipped in as little as 24 hours. Please Contact Us for more information.
Questions? We can help! 888-791-9590